Factory Kit

Factory Kit Quickstart Guide Here's everything you need to know about setting up your Factory Kit. The Tulip Factory Kit was the first-touch kit of accessories and hardware for new Tulip users to get started with edge connectivity. Factory ...

Factory Kit Materials and Procurement Information This article details the material and procurement info of the Factory Kit's contents for future reference. The Tulip Factory Kit was the first-touch kit of accessories and hardware for new Tuli...

Edge IO Light Strip Setup Get your Tulip Light Kit up and running in minutes! The Tulip Light Kit is a helpful way to help direct attention to a specific item or area with a Tulip app. This article will walk you through using the two native ...

Break Beam Sensor Unit Test Use this application in order to test whether your break beam sensor is connected and is functioning correctly Purpose The purpose of the Break Beam Sensor Unit Test application is to allow users to test whether...

How to Set Up a Foot Pedal in Tulip Learn how to build apps with events from your foot pedal. Foot pedals are IoT devices that can be connected to Tulip through a Tulip Edge Device . The foot pedal can have either a USB or I/O connections. ...

Temperature and Humidity Sensors Unit Tests Use this application in order to test whether your temperature and humidity sensor has been set up correctly and is functioning as desired Purpose The purpose of the Temperature and Humidity Sens...

How To Include Factory Kit Devices in Apps Learn how to include 5 Factory Kit devices in your apps, including receiving human input and triggering devices based on actions in apps. The Tulip Factory Kit was the first-touch kit of accessories a...

Tulip Light Kit Initial Setup Here's how to set up your light kit and configure the LED strips. The Tulip Light Kit is a helpful way to help direct attention to a specific item or area with a Tulip app. This article will walk you through the...

Learn how to start building frontline operations apps with the Light Kit. This article will get you started with using your Tulip Light Kit in production. This article assumes that you have a Tulip Light Kit, and that it is already connected t...

Connecting the Factory Kit USB Devices (Barcode, Foot Pedal, Temp/Humidity) Here's how to connect the Factory Kit USB plug and play devices and test them The Tulip Factory Kit was the first-touch kit of accessories and hardware for new Tulip u...

Setting up the Break Beam Sensor Here's how to connect a break beam sensor to the Edge IO. The break beam sensor is connected to the Edge IO using the I/O pins located opposite the USB ports. To set up the break beam, you will need to have a...

Light Kit Unit Test Use this application in order to test whether your light kit has been set up correctly and is functioning as desired Purpose The purpose of the Light Kit Unit Test application is to allow users to test whether their lig...

Tulip Light Kit Technical Specifications Here are all the details about the Tulip Light Kit's technical specs. Voltage supply, Current Consumption and Conditioning Rated supply voltage: 5V (Vin_min: 4.8V Vin_max: 5.5V) Rated supply c...

Assembling the Light Stack Here's how to assemble your Light Stack. The last device that needs to be setup is the Andon Light Stack. In order to setup this device, we will need the parts referenced in the image below. Please make sure yo...