Technical Specifications for Edge IO
Documentation for the Edge IO technical specifications
Certifications
- FCC, CE, TELEC, and SRRC
Dimensions
- 150mm x 130mm x 35mm
Weight
- 250g
Power
- 24V 2 Terminal, Non-locking Phoenix Contact Connector
Processor
- ARMv8 4x A53 core
- 8GB eMMC
- 2 GB DDR3 RAM
RTC + Battery
USB-OTG “Type B” plug
Temperature Range (Operating / Storage)
- 0 - 75 ℃ non-condensing
Software
- Tulip Firmware
- Node-RED
Industrial I/O
- 4x 24V relay output drivers up to 500mA
- 8x Industrial I/O for 5V to 36V digital input
Sensors and Instrumentation
- 24V IEPE current source and input
- -3V - 3V Differential Input
- 0 - 10V Input
- Optional: 24V power source
Peripherals
- 6x USB 2.0
- 1x 2-channel integrated Tulip Light Kit engine
Legacy
- 1x RS232 with RTS/CTS
- 1x RS485 half-duplex
Networking
- 1x Gigabit Ethernet Phy (native) WAN
- 1x 10/100 Ethernet Phy LAN
- Dualband 802.11 ac Wireless Internet
- LAN IP Range - 10.0.5.0/24
Security
- ATECC608A
Trackable Assets
- QR Code-based serial “tulip-mfg://EIO-01-XXXXXXXX”
- Globally Unique MAC Addresses
DHCP Addresses
- For dynamic addresses, 10.0.5.2-10.0.5.20 are available.
- For static addresses, the entire 10.0.5.0/24 subnet is available which is 10.0.5.21-10.0.5.254.
Did you find what you were looking for?
You can also head to community.tulip.co to post your question or see if others have faced a similar question!