--- title: "配合 Mitutoyo U-wave 驱动程序使用 Mitutoyo 数字卡尺" slug: "using-the-mitutoyo-digital-caliper-with-mitutoyo-u-wave-driver" updated: 2026-10-22T12:56:44Z published: 2026-10-22T12:56:44Z canonical: "support.tulip.co/using-the-mitutoyo-digital-caliper-with-mitutoyo-u-wave-driver" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 配合 Mitutoyo U-wave 驱动程序使用 Mitutoyo 数字卡尺 *了解 Tulip 中配备 U-wave 驱动程序的三丰数字卡尺的相关功能和配置。* ## 功能 Mitutoyo 数字卡尺驱动程序允许 Tulip 应用程序连接至 Mitutoyo 数字卡尺设备,并获取其设备 ID 和测量数据。该驱动程序同时适用于基于 Windows 的 Tulip Player 和 Tulip IoT Gateway。 ### 事件 该驱动程序能够触发两种类型的事件。第一种是“长度测量”事件,其中包含设备测得的数据。 第二类是“带设备 ID 的长度测量”事件,其中包含设备 ID 和测量数据。需要明确的是,此处提到的四位数设备 ID 与设备标签上通常标注的 10 位数设备 ID 不同。该特定设备 ID 采用四位数格式。 例如,设备 ID 0012 的结构如下:前两位数字(00)代表组 ID,后两位数字(12)代表通道 ID。用户可以通过 PC 上的 U-WAVEPAK 软件灵活修改这些组 ID 和通道 ID。 ![Mitutoyo Digital Caliper with Mitutoyo U-wave Driver](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Mitutoyo%20Digital%20Caliper%20with%20Mitutoyo%20U-wave%20Driver.png) ## 配置 必须在[Tulip Player 的“驱动程序配置”页面中](/r230/docs/manage-drivers-for-a-display-device)启用此边缘驱动程序。为使 U-wave-R 在 Tulip 中正常运行,计算机上不得运行 U-Wave 软件。