--- title: "Using the Kolver EDU 2AE/TOP/E Driver" slug: "using-the-kolver-edu-2aetope-driver" updated: 2022-09-22T21:10:24Z published: 2022-09-22T21:10:24Z canonical: "support.tulip.co/using-the-kolver-edu-2aetope-driver" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 使用Kolver EDU 2AE/TOP/E驱动程序 ## 使用Kolver EDU 2AE/TOP/E驱动程序 *Kolver-EDU-2AE-TOP-E驱动的指南* 本文描述了Tulip中与Kolver-EDU-2AE-TOP-E驱动器相关的功能和配置。 ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_203248675.png) ## 功能 Kolver-EDU-2AE-TOP-E驱动程序支持控制器和Tulip之间的双向通信。 #### 该驱动器支持用一个属性来设置程序。 - 运行程序 - 一个与Kolver上设置的程序相对应的数字。 这个输出可以在Tulip应用触发器中使用,如下图所示。 ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_202614243.png) #### 驱动程序报告程序完成,有一个属性。 - Kolver程序结束 - 如果程序成功完成为真。 这个输出可以在郁金香应用触发器中使用,如下图所示。 ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_202614270.png) ## 配置 为了将你的Kolver控制器与Tulip一起使用,你需要建立一条电缆并配置控制器,以便与Tulip Edge IO或IO Gateway一起使用。 关于设置信息,请看这篇文章。[如何设置和使用Kolver扭矩控制器](https://support.tulip.co/docs/how-to-set-up-a-kolver-torque-controller) 然后,访问你的设备的设备门户页面,打开驱动程序。