--- title: "Using the Cognex In-Sight 2000 Driver" slug: "using-the-cognex-in-sight-2000-driver" updated: 2023-10-31T19:24:43Z published: 2023-10-31T19:24:43Z canonical: "support.tulip.co/using-the-cognex-in-sight-2000-driver" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 使用康耐视 In-Sight 2000 驱动程序 ## 使用康耐视 In-Sight 2000 驱动程序 *康耐视 Insight 2000 驱动程序指南* 本文介绍了 Tulip 中与康耐视 Insight 驱动程序相关的功能和配置。 ![Using the Cognex In-Sight 2000 Driver_203253959.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203253959.png) ## 功能 康耐视 In-Sight 驱动程序允许通过 Tulip I/O 网关和 Edge IO 将网络连接的 In-Sight 系列康耐视设备集成到 Tulip 应用程序中。 该驱动程序支持将视觉任务的结果从相机发送到 Tulip。这在 Tulip 应用程序编辑器中显示为 "设备事件",如下图所示: ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203253959.png) 还可以使用 "运行设备功能 "触发器加载视觉作业,如下图所示: ![Using the Cognex In-Sight 2000 Driver_203254100.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203254100.png) ## 配置 要配置康耐视 In-Sight 设备与 Tulip 一起使用,首先要确保康耐视 In-Sight 摄像头已通电,并与 Tulip Edge 设备连接到同一网络。 然后按照本文的演示配置相机输出:[如何配置康耐视和 Tulip](https://support.tulip.co/docs/how-to-configure-cognex-and-tulip) 然后,访问边缘设备的 Gateway Portal 页面配置驱动程序。 相关配置界面如下所示。 ![Using the Cognex In-Sight 2000 Driver_203251826.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203251826.png) 下面将详细介绍各选项: - *设备 IP*- 这是康耐视 In-Sight*设备*的 IPv4 地址。