--- title: "Using the Brecknell PS25 Scale Driver" slug: "using-the-brecknell-ps25-scale-driver" updated: 2023-10-31T19:39:15Z published: 2023-10-31T19:39:15Z canonical: "support.tulip.co/using-the-brecknell-ps25-scale-driver" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 使用布雷克内尔 PS25 称重驱动器 ## 使用布雷克内尔 PS25 光栅尺驱动器 *贝克内尔 PS25 称重驱动器指南* 本文介绍了 Tulip 中与布雷克内尔 PS25 称重驱动器相关的功能和配置。 ![](https://tulip-6b1d5e66f92a.intercom-attachments-1.com/i/o/199509422/a97c255ab94d4c57c4fc1de3/61wfmrAKmoL._AC_SY355_.jpg) ## 功能 Brecknell PS25 Scale 驱动程序支持向 Tulip 应用程序发送实时质量测量值。 该驱动程序报告的质量测量值有三个属性: - 模式 - 秤的测量模式 - 克 - 换算成克的测量值 - oz - 转换为盎司的测量值 该输出可用于 Tulip App 触发器,如下所示: ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Brecknell%20PS25%20Scale%20Driver_199507470.png) ## 配置 要配置 Brecknell PS25 称重显示器与 Tulip 一起使用,首先要确保您的设备已打开,并通过称重显示器随附的 USB 电缆连接到 Tulip IO Gateway。 然后,访问 IO Gateway 的 Gateway Portal 页面配置驱动程序。 相关配置屏幕如下所示。 ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Brecknell%20PS25%20Scale%20Driver_199508730.png) 下面将详细介绍各选项: - *使用秤盘负值*- 默认情况下,秤盘负值会发送到 Tulip。如果秤盘上的砝码归零,然后砝码被移除,就会出现这种情况。您可以选中该选项禁用此功能。