--- title: "Temperature and Humidity Sensors Unit Tests" slug: "temperature-and-humidity-sensors-unit-tests-1" updated: 2023-10-31T19:04:36Z published: 2023-10-31T19:04:36Z canonical: "support.tulip.co/temperature-and-humidity-sensors-unit-tests-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 温湿度传感器单元测试 ## 温湿度传感器单元测试 *使用此应用程序可测试温湿度传感器的设置是否正确,功能是否符合要求* **目的** 温湿度传感器单元测试 "应用程序的目的是让用户测试其传感器是否正确连接并按预期运行。本应用程序旨在测试 Phidgets 温湿度传感器和 Lascar 温湿度传感器。 **应用程序视频概览**[Embedded content](https://www.youtube.com/embed/0xHzjOZvn74) **设置** 要使用此应用程序,需要一个 Tulip Edge 设备和一个温湿度传感器。 有关设置 Tulip Edge 设备的说明,请[点击此处](https://support.tulip.co/docs/setting-up-a-tulip-io-gateway) 有关设置 Phidgets 温湿度传感器的说明,请点击[此处](https://support.tulip.co/docs/connecting-the-factory-kit-usb-devices-barcode-foot-pedal-temphumidity) 要设置 Lascar 温湿度传感器,请将 Lascar 温湿度传感器连接到 Edge 设备上的任何 USB 端口。 **工作原理** 该应用程序使用 Tulip Edge 设备和温湿度传感器,以测试传感器是否已连接并正常工作。打开应用程序后,用户可以选择测试 Phidgets 温湿度传感器或 Lascar 温湿度传感器。一旦用户选择了要测试的设备,就会跳转到一个带有灰色方框的屏幕,如果传感器连接正确、运行正常,灰色方框就会变成绿色,并以摄氏和华氏温度显示,同时也会显示湿度。否则,用户可以访问支持文章,其中提供了如何设置 Edge 设备和温湿度传感器并使其正常工作的相关说明。