--- title: "Reset I/O Gateway to Factory Settings" slug: "reset-io-gateway-to-factory-settings" updated: 2025-04-23T20:48:21Z published: 2025-04-23T20:48:21Z canonical: "support.tulip.co/reset-io-gateway-to-factory-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 将 I/O 网关重置为出厂设置 I/O Gateway Notice On November 1, 2021, Tulip will no longer sell I/O Gateway devices. Edge IO and Edge MC Devices are still available. [Learn More](https://support.tulip.co/docs/io-gateway-end-of-sale-announcement) 将重置 I/O 网关的默认配置。 这将通过清除将 I/O 网关重置为默认配置: - 网络配置 - I/O 网关访问凭证 - 郁金香账户验证 - 驱动配置 - 所有 I/O 网关设置,包括灯光套件 出厂重置后,I/O Gateway 的 IP 地址也可能发生变化。 这是重置 I/O Gateway 密码的唯一方法。 ## 说明 ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Reset%20I_O%20Gateway%20to%20Factory%20Settings_206487474.png) 1. 确认 I/O 网关未主动控制任何设备 2. 同时按住 A 和 B 按钮 5 秒钟 3. 当闪烁的指示灯熄灭时松开按钮 4. 当指示灯重新亮起(3-5 分钟)时,I/O Gateway 已重置 5. [设置 I/O 网关。](https://support.tulip.co/docs/setting-up-a-tulip-io-gateway)