--- title: "How to Configure the Network Settings on your Tulip Edge Device" slug: "how-to-configure-the-network-settings-on-your-tulip-edge-device" updated: 2025-01-08T13:52:34Z published: 2025-01-08T13:52:34Z canonical: "support.tulip.co/how-to-configure-the-network-settings-on-your-tulip-edge-device" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # 如何在 Tulip Edge 设备上配置网络设置 ## 用途 *以下是配置 Edge 设备使其与公司网络设置配合使用的不同方法。* 本文介绍如何配置边缘设备,使其在网络上正常运行。 NOTE This can be done at setup of your Tulip Edge Device or after it has been connected to your Tulip account. ## 开始 要调整 Edge 设备的网络设置,首先应通过 Edge 设备的无线网络将计算机连接到 Edge 设备。 - [连接到 Edge MC 的无线网络](https://support.tulip.co/docs/how-to-setup-wireless-connection-on-edge-mc) - [连接到 Edge IO 的无线网络](https://support.tulip.co/docs/how-to-set-up-wireless-connection-on-edge-io) 连接到 Edge 设备后,在浏览器中导航到[http://10.0.3.1](http://10.0.3.1),然后开始初始设置过程或登录 Edge 设备。 如果您是第一次设置 Edge 设备,请正常进行,直到进入第二步并单击 "**显示网络设置"**。 如果您已经完成设置,登录后将重定向到仪表板页面,您可以在此更新这些设置。 NOTE The screen might differ based on device type. ![Edge Device Network Settings Internet Connection](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Device%20Network%20Settings%20Internet%20Connection.png){height="" width="""} ## 设置有线连接 Edge 设备可配置为使用 DHCP 或手动操作。如果使用 DHCP,Edge 设备将自动分配以下内容: - IP - 子网 - 路由器 您可以设置和/或添加 DNS 位置。 ![Edge Device Network Configuration](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Device%20Network%20Configuration.png) 如果您选择手动设置边缘设备的网络设置,请向 IT 部门寻求帮助。这将使您能够配置以下内容 - IP 地址 - 子网 - 路由器 - DNS ![Edge Devices Manual Configuration](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20Manual%20Configuration.png){height="" width="""} ## 设置边缘设备使用代理服务器 如果出于安全考虑,您的网络需要通过代理服务器路由所有流量,则可在上述有线连接的同一页面进行设置。请按照以下步骤配置代理服务器。 1. 单击 "**代理**"展开代理部分。 ![Edge Devices HTTP Proxy](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20HTTP%20Proxy.png){height="" width="""} 1. 单击**HTTP 代理**,它将变为蓝色,表示已启用。 ![Edge Devices HTTP Proxy3](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20HTTP%20Proxy3.png){height="" width="""} 1. 现在,您将看到设备门户的代理配置实用程序,如下所示: ![Edge Devices HTTP Proxy2](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20HTTP%20Proxy2.png){height="" width="""} 1. 输入代理的主机名、端口、用户名和密码。 2. 单击**下一步**。Edge 设备现在会检查网络连接,并在出现问题时发出警报。 ## 在 Edge 设备上添加自定义 CA 证书 如果您使用的代理需要自定义 CA 证书,您可以将该证书或 "cert "添加到与代理相同位置的 Edge 设备上。 NOTE We only support base 64 encoded format. 添加自定义证书 1. 单击**根证书**展开。 ![Edge Devices Root Certificate](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20Root%20Certificate.png){height="" width="""} 1. 单击**添加新证书**。 2. 文件资源管理器将打开,您可以将保存在电脑上的自定义证书上传到 Edge 设备。 3. 上传证书后,单击 "**下一步/保存**"保存证书并测试网络连接。如果 Edge 设备无法连接到互联网,你将收到一个警报。您可以[导航到 "诊断 "页面](/r230/docs/how-to-configure-the-network-settings-on-your-tulip-edge-device)并从下拉菜单中选择["](/r230/docs/how-to-configure-the-network-settings-on-your-tulip-edge-device) **网络健康状况**"来检查**网络健康状况**。 4. 网络设置页面会显示所有已添加的证书。最多可添加 10 个证书。 ![Edge Devices Root Certificate2](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Edge%20Devices%20Root%20Certificate2.png){height="" width="""} --- 找到要找的内容了吗? 你还可以前往[community.tulip.co](https://community.tulip.co/?utm_source=intercom&utm_medium=article-link&utm_campaign=all)发布你的问题,或看看其他人是否也遇到过类似问题!