---
title: "Zebra Android DataWedge configuration"
slug: "zebra-android-datawedge-configuration"
updated: 2023-04-26T17:15:44Z
published: 2023-04-26T17:15:44Z
canonical: "support.tulip.co/zebra-android-datawedge-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.tulip.co/llms.txt
> Use this file to discover all available pages before exploring further.

# Zebra Android DataWedge configuration

*Learn to configure the Zebra Android DataWedge for a barcode scanner.*

## Configuration

The following settings are required to use the integrated barcode scanner that comes with Zebra Android devices with Tulip.

1. Open the DataWedge application on your Zebra Android device.
2. Open the active or default profile.
3. Scroll to the **Keystroke output** section.
4. Check the **Enabled** check box if it is not already enabled.
5. Specify the **Inter character delay** value to **50**.

![Zebra Android DataWedge Configuration.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Zebra%20Android%20DataWedge%20Configuration.png)