--- title: "SAP S/4 HANA Cloud Connector" slug: "sap-s4-hana-cloud-connector" updated: 2025-09-01T10:29:12Z published: 2025-09-01T10:29:12Z canonical: "support.tulip.co/sap-s4-hana-cloud-connector" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # SAP S/4 HANA Cloud Connector ## SAP S/4 HANA Cloud Connector *Integrating with multiple APIs for SAP S/4 HANA Cloud* Additional Configuration Required This connector is a good starting point that implements a core set of the service's most common functions. You should expect to extend it by adding functions for the specific endpoints your workflow requires. Additionally, some configuration may be required in SAP to establish a connection with Tulip. Please review our [connector framework](/r230/docs/connectors) to learn more about how to build and modify connectors in Tulip. Introduction SAP S/4HANA is an enterprise resource planning (ERP) system with built-in intelligent technologies, including AI, machine learning, and advanced analytics. The Goal of this connector is to use SAP S/4 HANA Cloud Api with Tulip using HTTP [Connectors](https://support.tulip.co/docs/what-are-connectors) & provide our customers with an out of box connector that can be imported into their instance to leverage the features offered by SAP S/4 HANA Cloud. Connecting to an SAP S/4HANA on-premise install This SAP S4 HANA Connector would also work with on-premise installs if you also install Tulip's On-Premise Connector Host and connect to SAP using it. Read more [here](/r230/docs/overview-of-on-premise-connector-hosts). #### Purpose 1. We are going to highlight different HTTP connector functions that can be built by doing HTTP calls to SAP S/4 HANA API endpoints to interact with the various services that are offered by SAP S/4 Hana, Such as Material Stock, Planned Order, Production Order, Material planning and Inventory Lot. #### API Doc The Links below will serve as a guide for the APIs used within the connector. The return parameter definition and information about their part in the schema are also available in the links 1. [SAP S/4 Hana Demo Application](https://www.sap.com/documents/2020/06/943efecf-9f7d-0010-87a3-c30de2ffd8ff.html) 2. [Material Stock API](https://api.sap.com/api/API_MATERIAL_STOCK_SRV/resource) 3. [Material Planning Data API](https://api.sap.com/api/API_MRP_MATERIALS_SRV_01/resource) 4. [Planned Order API](https://api.sap.com/api/API_PLANNED_ORDERS/resource) 5. [Production Order API](https://api.sap.com/api/API_PRODUCTION_ORDER_2_SRV/resource) 6. [Inspection Lot API](https://api.sap.com/api/API_INSPECTIONLOT_SRV/resource) #### Pre-Requisites 1. Create a SAP Universal ID. 2. Generate API Key for accessing the SAP S/4 HANA APIs #### Tulip Connection Details The following information would need to be configured on Tulip's connectors. 1. Running On: Cloud Connector Host 2. Host :sandbox.api.sap.com 3. Port:443 4. TLS:Yes 5. Basic Authentication: API Key will be used for authenticating API Calls from connector ## Connector Functions ## Material Stock API #### Material_Stock_API_Material_Stock **Purpose** The purpose of the connector is to fetch all the material and its UOM available in the system. The response will be an array of objects with each object storing material id and the UOM. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MaterialStock](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MaterialStock) **Required Input** The following are the parameters that are sent as the Request Body 1. $top - query parameter set from the connector, by default set to 25 **Output Extractor** An array of Material Details 1. Material - Id 2. MaterialBaseUnit - UOM of the Material #### Material_Stock_API_Material_Stock_in_Account_Model **Purpose** The purpose of the connector is to fetch material stocks in an account model for which a certain stock has been posted. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MatlStkInAcctMod](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MatlStkInAcctMod) **Required Input** The following are the parameters that are sent as query parameters 1. $top - query parameter set from the connector, by default set to 50 **Output Extractor** An array of Material Details with Stock 1. __metadata.id 2. __metadata.uri 3. Material 4. Plant 5. StorageLocation 6. Batch 7. Supplier 8. Customer 9. WBSElementInternalID #### Material_Stock_API_Material_Stock_in_Account_Model **Purpose** The purpose of the connector is to fetch all the stock details of the material identified by the supplied Id, the connector also returns the Material basic information . **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MaterialStock(‘$Material$)](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MATERIAL_STOCK_SRV/A_MaterialStock(%E2%80%98%24Material%24)) **Required Input** The following are the parameters that are sent as query parameters 1. Material: Material Id **Output Extractor** 1. Material 2. MaterialBaseUnit An array of Material Stock Details 1. __metadata.uriMaterial 2. Plant 3. StorageLocation 4. Batch 5. Supplier 6. Customer 7. WBSElementInternalID 8. SDDocument 9. SDDocumetnItem 10. InventorySpecialStockType 11. InventoryStockType 12. MatlWrhsStkQTYInMatBaseUnit - Material warehouse Stock Quantity in Material Base Unit ## Material Planning Data API #### Material_Planning_Data_API_MRP_Material **Purpose** The purpose of the connector is to fetch all the details of the materials used in Material Requirement Planning, There are many response parameters that are returned in the connector, we have highlighted a few in the documentation. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MRP_MATERIALS_SRV_01/A_MRPMaterial](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MRP_MATERIALS_SRV_01/A_MRPMaterial) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 25 **Output Extractor** An array of Material Plant Details - Few of the parameters are highlighted below, There are many parameters returned by the connector which could be used based on a specific use case. Some of those parameters are 1. Material 2. MRPPlant 3. MRPArea 4. MaterialName 5. MRPAreaText 6. MRPAreaCategory 7. MRPAreaCategoryName 8. MaterialGroup 9. CrossPlantStatus 10. CrossPlantStatusName 11. BaseUnit 12. UnitOfMeasureName 13. LowLevelCode 14. PurchasingGroup 15. PurchasingGroupName #### Material_Planning_Data_API_Supply_And_Demand Purpose The purpose of the connector is to fetch all the details of supply and demand information for materials in Material Requirements Planning (MRP) over a certain time period. There are many response parameters that are returned in the connector, we have highlighted a few in the documentation. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MRP_MATERIALS_SRV_01/SupplyDemandItems](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_MRP_MATERIALS_SRV_01/SupplyDemandItems) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 25 2. filterField : The Name of the Filter to be searched against 3. FilterCondition: The allowed values are eq ( Equal) and ne (Not Equal) 4. filterValue: Matching Value - You can filter by value in a specified column **Output Extractor** An array of supply and demand information for materials - The response parameters are highlighted below. 1. Material 2. MRPPlant 3. MRPArea 4. UnitOfMeasureName 5. MRPController 6. MRPPlanningSegmentType 7. MaterialShortageProfile 8. ReceiptCategoryGroup 9. MaterialBaseUnit 10. UnitOfMeasureText 11. MaterialExternalID 12. MRPAvailability 13. MaterialSafetyStockQty 14. MRPElementOpenQuantity 15. MRPAvailableQuantity 16. MRPElementCategory 17. MRPElementCategoryShortName 18. MRPElementCategoryName 19. ProductionVersion ## Planned Order API #### Planned_Order_API_Planned_Order **Purpose** The purpose of the connector is to fetch information available on the header data of existing planned orders. There are many response parameters that are returned in the connector, we have highlighted parameters that could be used as inputs to other connectors like PlannedOrder. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 25 #### Output Extractor An array of planned orders information - The response parameters are highlighted below. 1. PlannedOrder 2. PlannedOrderType 3. PlannedOrderProfile 4. Material 5. MaterialName 6. ProductionPlant 7. MRPPlant 8. MRPArea 9. ProductionVersion 10. MaterialProcurementCategory 11. MaterialProcurementType 12. PlndOrderPlannedStartDate 13. PlndOrderPlannedStartTime 14. PlndOrderPlannedEndDate 15. PlndOrderPlannedEndTime 16. PlannedOrderOpeningDate 17. LastChangeDateTime 18. ProductionStartDate 19. ProductionEndDate #### Planned_Order_API_Planned_Order_by_Id **Purpose** The purpose of the connector is to fetch information available on the header data of the existing planned order identified by the PlannedOrder. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on a specific use case **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('$PlannedOrder$’)](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('%24PlannedOrder%24%E2%80%99)) **Required Input** The following parameters are sent as a query parameter(URL Parameter) 1. $top default value set 25 2. PlannedOrder #### Output Extractor An object of planned orders information - The response parameters are highlighted below. 1. PlannedOrder 2. PlannedOrderType 3. PlannedOrderProfile 4. Material 5. MaterialName 6. ProductionPlant 7. MRPPlant 8. MRPArea 9. ProductionVersion 10. MaterialProcurementCategory 11. MaterialProcurementType 12. PlndOrderPlannedStartDate 13. PlndOrderPlannedStartTime 14. PlndOrderPlannedEndDate 15. PlndOrderPlannedEndTime 16. PlannedOrderOpeningDate 17. LastChangeDateTime 18. ProductionStartDate 19. ProductionEndDate #### Planned_Order_API_Planned_Order_Capacity_By_Id **Purpose** The purpose of the connector is to fetch the information on the capacity data belonging to the order, specified using the planned order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('$PlannedOrder$’)/to_PlannedOrderCapacity](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('%24PlannedOrder%24%E2%80%99)/to_PlannedOrderCapacity) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 25 2. PlannedOrder **Output Extractor** An array of capacity information for planned Orders - The response parameters are highlighted below. 1. CapacityRequirement 2. CapacityRequirementItem 3. CapacityRqmtItemCapacity 4. PlannedOrder 5. PlannedOrderType 6. Sequence 7. Operation 8. SubOperation 9. WorkCenter 10. CapacityCategoryCode 11. Capacity 12. MRPController 13. MRPPlant #### Planned_Order_API_Planned_Order_Capacity_by_PlannedOrder_And_Filters **Purpose** The purpose of the connector is to fetch the capacity information for a single capacity item that you specify using the capacity requirement ID, the capacity requirement item, and the item capacity. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('$PlannedOrder$’)/A_PlannedOrderCapacity(CapacityRequirement='{CapacityRequirement}',CapacityRequirementItem='{CapacityRequirementItem}',CapacityRqmtItemCapacity='{CapacityRqmtItemCapacity}')](https://sandbox.api.sap.com/s4hanacloud/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('%24PlannedOrder%24%E2%80%99)/A_PlannedOrderCapacity(CapacityRequirement='%7BCapacityRequirement%7D',CapacityRequirementItem='%7BCapacityRequirementItem%7D',CapacityRqmtItemCapacity='%7BCapacityRqmtItemCapacity%7D')) **Required Input** The following are the parameters that are sent query parameter 1. $top default value set 25 2. PlannedOrder 3. CapacityRequirement 4. CapacityRequirementItem 5. CapacityRqmtItemCapacity **Output Extractor** An array of capacity information for planned Order - The response parameters are highlighted below. 1. CapacityRequirement 2. CapacityRequirementItem 3. CapacityRqmtItemCapacity 4. PlannedOrder 5. PlannedOrderType 6. Sequence 7. Operation 8. SubOperation 9. WorkCenter 10. CapacityCategoryCode 11. Capacity 12. MRPController 13. MRPPlant #### Planned_Order_API_Planned_Order_Components_by_PlannedOrder_Id **Purpose** The purpose of the connector is to fetch information on the components belonging to the order, specified using the planned order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('{PlannedOrder}')/to_PlannedOrderComponent](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('%7BPlannedOrder%7D')/to_PlannedOrderComponent) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 25 2. PlannedOrder **Output Extractor** An array of components belonging to the order - The response parameters are highlighted below. 1. Reservation 2. ReservationItem 3. PlannedOrder 4. BOMItem 5. BOMItemDescription 6. BillOfMaterialCategory 7. SortField 8. BOMItemCategory 9. Material 10. MatlCompRequirementDate 11. GoodsMovementEntryQty 12. EntryUnit 13. RequiredQuantity 14. Base Unit 15. WithdrawnQuantity 16. MaterialComponentIsPhantomItem 17. Plant 18. Storage Location 19. SupplyArea #### Planned_Order_API_Planned_Order_Components_by_PlannedOrder_and_Filters **Purpose** The purpose of the connector is to fetch data for a single planned order component that you specify using the reservation number and the reservation item number. There are many response parameters that are available in the connector, we have highlighted all of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('{PlannedOrder}')/to_PlannedOrderComponent(Reservation='{Reservation}',ReservationItem='{ReservationItem}')](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PLANNED_ORDERS/A_PlannedOrder('%7BPlannedOrder%7D')/to_PlannedOrderComponent(Reservation='%7BReservation%7D',ReservationItem='%7BReservationItem%7D')) #### **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 25 2. PlannedOrder 3. Reservation 4. ReservationItem **Output Extractor** An object of components belonging to the order - The response parameters are highlighted below. 1. Reservation 2. ReservationItem 3. PlannedOrder 4. BOMItem 5. BOMItemDescription 6. BillOfMaterialCategory 7. SortField 8. BOMItemCategory 9. Material 10. MatlCompRequirementDate 11. GoodsMovementEntryQty 12. EntryUnit 13. RequiredQuantity 14. Base Unit 15. WithdrawnQuantity 16. MaterialComponentIsPhantomItem 17. Plant 18. Storage Location 19. SupplyArea ## Production Order API #### Production_Order_API_Production_Order **Purpose** The purpose of the connector is to fetch information available on the header data of existing production orders. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 25 **Output Extractor** An array of Production order parameters - The response parameters are highlighted below. 1. ManufacturingOrder 2. ManufacturingOrderCategory 3. ManufacturingOrderType 4. ManufacturingOrderImportance 5. OrderIsCreated 6. OrderIsReleased 7. OrderIsPrinted 8. OrderIsConfirmed 9. OrderIsClosed 10. OrderIsPartiallyDelivered 11. OrderIsMarkedForDeletion 12. MfgOrderCreationDate 13. MfgOrderCreationTime 14. LastChangeDateTime 15. Plant 16. MRPArea 17. MRPController 18. Production Supervisor 19. ProductionVersion 20. PlannedOrder 21. MfgOrderPlannedStartDate 22. MfgOrderPlannedStartTime #### #### Production_Order_API_Production_Order_by_Manufacturing_Order **Purpose** The purpose of the connector is to fetch information for a specific production order that you specified using the production order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('{ManufacturingOrder}')](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('%7BManufacturingOrder%7D')) **Required Input** The following are the parameters that are sent as query parameters 1. ManufacturingOrder **Output Extractor** An Object of Production order parameters - Some of the response parameters are highlighted below. 1. ManufacturingOrder 2. ManufacturingOrderCategory 3. ManufacturingOrderType 4. ManufacturingOrderImportance 5. OrderIsCreated 6. OrderIsReleased 7. OrderIsPrinted 8. OrderIsConfirmed 9. OrderIsClosed 10. OrderIsPartiallyDelivered 11. OrderIsMarkedForDeletion 12. MfgOrderCreationDate 13. MfgOrderCreationTime 14. LastChangeDateTime 15. Material 16. MfgOrderPlannedStartDate 17. MfgOrderPlannedStartTime 18. MfgOrderPlannedEndDate 19. MfgOrderPlannedEndTime #### Production_Order_API_Production_Order_by_Manufacturing_Order_Component **Purpose** The purpose of the connector is to fetch information on the components belonging to the order specified using the production order number. There are many response parameters that are available in the connector, we have highlighted all of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('{ManufacturingOrder}')/to_ProductionOrderComponent](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('%7BManufacturingOrder%7D')/to_ProductionOrderComponent) #### Required Input The following are the parameters that are sent as the Request Body 1. $top default value set to 25 2. ManufacturingOrder **Output Extractor** An Array of component parameters of Production order - Some of the response parameters are highlighted below. 1. Reservation 2. ReservationItem 3. MaterialGroup 4. Material 5. Plant 6. ManufacturingOrderCategory 7. ManufacturingOrderType 8. ManufacturingOrder 9. ManufacturingOrderSequence 10. ManufacturingOrderOperation 11. Production Plant 12. OrderInternalBillOfOperations 13. MatlCompRequirementDate 14. MatlCompRequirementTime 15. BillOfMaterialCategory 16. BOMItem 17. BOMItemCategory 18. BillOfMaterialItemNumber 19. BOMItemDescription 20. Storage Location #### Production_Order_API_Production_Order_by_Manufacturing_Order_Items **Purpose** The purpose of the connector is to fetch information on the items belonging to the order specified using the production order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('{ManufacturingOrder}')/to_ProductionOrderItem](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('%7BManufacturingOrder%7D')/to_ProductionOrderItem) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 25 2. ManufacturingOrder **Output Extractor** An Array of items parameter of Production order - Some of the response parameters are highlighted below. 1. ManufacturingOrder 2. ManufacturingOrderItem 3. ManufacturingOrderCategory 4. ManufacturingOrderType 5. IsCompletelyDelivered 6. Material 7. Production Plant 8. Plant 9. MRPArea 10. MfgOrderItemPlndDeliveryDate 11. MfgOrderItemActualDeliveryDate 12. Production Unit 13. MfgOrderItemPlannedTotalQty 14. MfgOrderItemPlannedScrapQty 15. MfgOrderItemGoodsReceiptQty 16. MfgOrderItemActualDeviationQty #### Production_Prder_API_Production_Order_by_Manufacturing_Order_Operation **Purpose** The purpose of the connector is to fetch information on the operations belonging to the order specified using the production order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('{ManufacturingOrder}')/to_ProductionOrderOperation](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('%7BManufacturingOrder%7D')/to_ProductionOrderOperation) #### Required Input The following are the parameters that are sent as query parameters 1. $top default value set to 25 2. ManufacturingOrder **Output Extractor** An array of Operation parameters for Production order - Some of the response parameters are highlighted below. 1. OrderInternalBillOfOperations 2. OrderIntBillOfOperationsItem 3. ManufacturingOrder 4. ManufacturingOrderSequence 5. ManufacturingOrderOperation 6. ManufacturingOrderSubOperation 7. ManufacturingOrderCategory 8. ManufacturingOrderType 9. Production Plant 10. WorkCenterInternalID 11. WorkCenterTypeCode 12. WorkCenter #### Production_Order_API_Production_Order_by_Manufacturing_Order_Status **Purpose** The purpose of the connector is to fetch information on the status of the order specified using the production order number. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('{ManufacturingOrder}')/to_ProductionOrderStatus](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_PRODUCTION_ORDER_2_SRV/A_ProductionOrder_2('%7BManufacturingOrder%7D')/to_ProductionOrderStatus) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 25 2. ManufacturingOrder **Output Extractor** An array of the status of Production order - The response parameters are highlighted below. 1. ManufacturingOrder 2. StatusCode 3. IsUserStatus 4. StatusShortName 5. StatusName ## Inspection Data API #### Inspection_Lot_API_Inspection_Lot_Data **Purpose** The purpose of the connector is to fetch information of inspection lots with data at the inspection lot header level. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLot](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLot) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 50 **Output Extractor** An array of inspection lot information - The response parameters are highlighted below. 1. InspectionLot 2. Material 3. Batch 4. Plant 5. InspectionLotOrigin 6. OrderInternalBillOfOperations 7. ManufacturingOrder 8. InspectionLotText 9. InspectionLotType 10. InspectionLotQuantity 11. InspectionLotActualQuantity 12. InspectionLotDefectiveQuantity 13. InspectionLotQuantityUnit 14. InspLotCreatedOnLocalDate 15. InspSubsetFieldCombination 16. InspLotNmbrOpenLongTermCharc 17. StatusObject 18. StatusObjectCategory 19. InspectionLotObjectText 20. StatusProfile #### Inspection_Lot_API_Inspection_Lot_Statuses **Purpose** The purpose of the connector is to fetch information of inspection lot status information, for example, whether results are confirmed or defects are recorded. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on the use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLotWithStatus](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLotWithStatus) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set 50 **Output Extractor** An array of inspection lot status information - The response parameters are highlighted below. InspectionLot 1. InspectionLotStatusCreated 2. InspectionLotStatusReleased 3. InspectionLotStatusSkip 4. InspLotStatusRsltsConfirmed 5. InspLotStsDefectsRecorded 6. InspLotStsShrtTrmInspCmpltd 7. InspLotStatusInspCompleted 8. InspLotStatusCanceled 9. InspLotStatusRepair #### Inspection_Lot_API_Inspection_Lot_Statuses_by_Inspection Lot **Purpose** The purpose of the connector is to fetch information of the inspection lot status information of a specific inspection lot. There are many response parameters that are available in the connector, we have highlighted a few of them in the documentation. We could use the required parameters based on a specific use case. **Endpoint** HTTP GET call to the endpoint [https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLotWithStatus(‘{InspectionLot}’)](https://sandbox.api.sap.com/s4hanacloud/sap/opu/odata/sap/API_INSPECTIONLOT_SRV/A_InspectionLotWithStatus(%E2%80%98%7BInspectionLot%7D%E2%80%99)) **Required Input** The following are the parameters that are sent as query parameters 1. $top default value set to 25 2. Inspection Lot **Output Extractor** An object of inspection lot status information - The response parameters are highlighted below.