---
title: "Kolver EDU 2AE/TOP/E driver"
slug: "kolver-edu-2aetope-driver"
tags: ["Devices"]
updated: 2022-09-30T14:37:11Z
published: 2022-09-30T14:37:11Z
canonical: "support.tulip.co/kolver-edu-2aetope-driver"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.tulip.co/llms.txt
> Use this file to discover all available pages before exploring further.

# Using the Kolver EDU 2AE/TOP/E Driver

## Using the Kolver EDU 2AE/TOP/E Driver

*A guide to the Kolver-EDU-2AE-TOP-E Driver*

This article describes the capabilities and configuration associated with the Kolver-EDU-2AE-TOP-E driver in Tulip.

![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_203248675.png)

## Capabilities

The Kolver-EDU-2AE-TOP-E driver supports bidirectional communication between controller and Tulip.

#### The driver supports setting programs with one property:

- Run Program - a number corresponding to a program set on the Kolver.

This output can be used in a Tulip App Trigger as shown below:

![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_202614243.png)

#### The driver reports that a program is complete with one property:

- Kolver Program Ended -  True if program completed successfully.

This output can be used in a Tulip App Trigger as shown below:

![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Kolver%20EDU%202AE_TOP_E%20Driver_202614270.png)

## Configuration

In order to use your Kolver controller with Tulip, you will need to build a cable and configure the controller to use it with the Tulip Edge IO or IO Gateway. For setup information, please see this article. [How to Set Up and Use a Kolver Torque Controller](https://support.tulip.co/docs/how-to-set-up-a-kolver-torque-controller)

Then, visit the Device Portal page for your Device to turn on the driver.