--- title: "Edge MCの設定" slug: "setting-up-an-edge-mc" updated: 2026-10-22T12:42:03Z published: 2026-10-22T12:42:03Z canonical: "support.tulip.co/setting-up-an-edge-mc" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.tulip.co/llms.txt > Use this file to discover all available pages before exploring further. # Edge MCの設定 *Edge MCの初回セットアップ方法。* Edge MCは、Edge IOおよびI/Oゲートウェイと同じDevice Portalを使用します。この記事では、デバイスの接続方法について説明します。 ## 物理的なセットアップ ![Setting Up an Edge MC_206509862.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Setting%20Up%20an%20Edge%20MC_206509862.png) 1. DC-5V USB電源ポートの位置を確認する 2. 付属のUSB電源ケーブルを接続します 3. 電源ケーブルのもう一方の端を電源コンセントに差し込みます:::(Warning) (Power Requirements) The Edge MC needs at least 2.5A to properly function. ::: ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Setting%20Up%20an%20Edge%20MC_206510021.png) 1. 赤色のLEDが点灯し、点滅することを確認してください ![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Setting%20Up%20an%20Edge%20MC_206510508.png) 1. イーサネットケーブルをWANポートに接続してください 2. もう一方の端を、使用可能なイーサネットポートに差し込んでください ## 次の手順: [Edge MCをTulipアカウントに登録してください](https://support.tulip.co/docs/how-to-register-an-edge-mc)