---
title: "Cognex In-Sight 2000 driver"
slug: "cognex-in-sight-2000-driver"
tags: ["Devices"]
updated: 2022-09-30T17:28:21Z
published: 2022-09-30T17:28:21Z
canonical: "support.tulip.co/cognex-in-sight-2000-driver"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.tulip.co/llms.txt
> Use this file to discover all available pages before exploring further.

# Using the Cognex In-Sight 2000 Driver

## Using the Cognex In-Sight 2000 Driver

*A guide to the Cognex-Insight-2000 Driver*

This article describes the capabilities and configuration associated with the Cognex Insight driver in Tulip.

![Using the Cognex In-Sight 2000 Driver_203253959.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203253959.png)

## Capabilities

The Cognex In-Sight driver allows network-connected In-Sight series Cognex devices to be integrated into Tulip Apps though the Tulip I/O Gateway and Edge IO.

The driver supports sending the results of a Vision Job from the camera to Tulip. This is exposed in the Tulip App Editor as a "Device Event" as shown below:

![](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203253959.png)

It's also possible to load a vision job using the "Run Device Function" trigger as shown below:

![Using the Cognex In-Sight 2000 Driver_203254100.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203254100.png)

## Configuration

To configure your Cognex In-Sight device to be used with Tulip, first ensure that your Cognex In-Sight Camera is powered and connected to the same network as your Tulip Edge Device.

Then configure the camera output as demonstrated in this article: [How to Configure Cognex and Tulip](https://support.tulip.co/docs/how-to-configure-cognex-and-tulip)

Then, visit the Gateway Portal page for your Edge Device to configure the driver.

The relevant configuration screen is shown below.

![Using the Cognex In-Sight 2000 Driver_203251826.png](https://cdn.document360.io/7c6ff534-cad3-4fc8-9583-912c4016362f/Images/Documentation/Using%20the%20Cognex%20In-Sight%202000%20Driver_203251826.png)

The options are described in detail below:

- *IP of device* - This is the IPv4 address of the Cognex In-Sight device.